Every homeowner wants their house to look its best. But sometimes, hiring a professional to do the job can get expensive. That’s why DIY home improvement hacks are so popular! However, a lot of home improvement tasks can be overwhelming; that’s why it’s good to get some ideas to make the job a little easier! This article will outline some of the best hacks that every homeowner should know. From painting tips to tricks for fixing leaks, this post has you covered. So read on and learn how you can improve your home without spending a fortune!
Contents
Use A Rubber Band To Grip Stripped Screws
Home improvement projects can be frustrating when you come across a stripped screw. Normally, you would use a screwdriver to grip the head of the screw and turn it. However, this is not possible when the head of the screw is stripped. If you find yourself in this situation, there is no need to despair. There is a simple fix that only requires a rubber band. First, find a rubber band that is stretchy enough to fit over the stripped screw head. Then, place the rubber band over the head of the screw and align it with the slot in the screwdriver. Finally, grip the handle of the screwdriver and twist it in the same direction that you would if the screw was not stripped. The rubber band will grip the head of the screw and allow you to remove it.
Fix A Leaky Faucet With Vinegar
A dripping faucet is not only annoying, but it can also waste a lot of water. If you have a leaky faucet, there is no need to call a plumber. You can fix it yourself with a simple household ingredient: vinegar. First, turn off the water to your sink. Then, remove the handle of the faucet and use a wrench to remove the packing nut. Next, locate the rubber washer and remove it. Once you have removed the washer, soak it in vinegar for a few minutes. Doing this will soften the rubber and make it more pliable. Finally, put the washer back in place and reassemble the faucet. Once you have done this, turn on the water and check for leaks. The vinegar will have sealed any gaps and stopped the leak.
Roll Heavy Objects On PVC Pipe
Moving heavy objects is one of the most challenging tasks when completing a home improvement project. Whether you are moving a piece of furniture or hauling a heavy appliance, it can be difficult to do it by yourself. And if you try to push the object across the floor, you run the risk of damaging your floor. To avoid this, roll the object on a few pieces of PVC pipe. PVC pipe is strong enough to support the weight of heavy objects, and it will not damage your floor. Simply place the PVC pipe under the object and roll it to where you need it to go. This can save you a lot of potential damage as well as a bunch of back pain from trying to carry heavy objects where ever they need to go!
Magnetize Your Screw Driver
One of the most annoying things about home improvement projects is trying to find small screws and nails that have fallen on the floor. If you have ever dropped a screw while working, then you know how difficult it can be to find it again. To avoid this frustration, magnetize your screwdriver. This will allow you to pick up any screws or nails that you drop while working. To do this, simply rub the screwdriver on a magnet for a few minutes. The screwdriver will become magnetized and will be able to pick up small metal objects. This is a great way to save a hassle when you are working on a project because you will not have to search for dropped screws or struggle with keeping a screw on the end of the screwdriver in tight spaces.
Use A Bobby Pin To Hold Nails In Place
Another frustrating thing about home improvement projects is trying to hold a nail in place while you hammer it. If you’ve ever hammered your finger, you know how helpful this hack can be. To avoid this, use a bobby pin to hold the nail in place. Then, you can hammer away without having to worry about hitting your fingers. This is a great way to avoid frustration and pain while working on your project.
Use A Hair Dryer To Remove Adhesive
If you’ve ever had to remove tape from a wall after a few days, you know the frustration of trying to peel off the adhesive without damaging whatever is underneath. But did you know that there’s an easy way to remove adhesive using nothing more than a hairdryer? Just point the hairdryer at the adhesive and turn it on to the highest setting. Hold it close enough to soften the adhesive, but not so close that you risk melting or burning the material beneath. After a few seconds, the adhesive should be soft enough to peel away easily. You can use a putty knife or razor blade to scrape away any remaining residue if necessary.
Use Q-Tips To Fix Painting Mistakes
You’re painting your bedroom, and you step back to take a look at your work. And then you see it: a tiny mistake that ruins the entire look of the wall. What do you do? You could repaint the entire wall, but that would be a lot of work. Or you could try to fix the mistake with a q-tip. Dip the q-tip in paint remover and gently blot the mistake. The paint should come off easily, and you won’t have to repaint the entire wall. Of course, this method won’t work for all painting mistakes, but it’s worth a try for small imperfections.
Conclusion
These are just a few of the many helpful DIY home improvement hacks that every homeowner should know. By using these hacks, you can save time, money, and frustration on your next project. So next time you’re starting a home improvement project, be sure to keep these hacks in mind! Just remember, with a little ingenuity and effort, you can make your home improvement project go much smoother!
